k_log.h

Go to the documentation of this file.

 
/* @(#)e_log.c 1.3 95/01/18 */
/*
 * ====================================================
 * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
 *
 * Developed at SunSoft, a Sun Microsystems, Inc. business.
 * Permission to use, copy, modify, and distribute this
 * software is freely granted, provided that this notice
 * is preserved.
 * ====================================================
 */
 
#include "../inc/cdefs-compat.h"
//__FBSDID("$FreeBSD: src/lib/msun/src/k_log.h,v 1.2 2011/10/15 05:23:28 das Exp $");
 
/*
 * k_log1p(f):
 * Return log(1+f) - f for 1+f in ~[sqrt(2)/2, sqrt(2)].
 *
 * The following describes the overall strategy for computing
 * logarithms in base e.  The argument reduction and adding the final
 * term of the polynomial are done by the caller for increased accuracy
 * when different bases are used.
 *
 * Method :
 *   1. Argument Reduction: find k and f such that
 *          x = 2^k * (1+f),
 *     where  sqrt(2)/2 < 1+f < sqrt(2) .
 *
 *   2. Approximation of log(1+f).
 *  Let s = f/(2+f) ; based on log(1+f) = log(1+s) - log(1-s)
 *       = 2s + 2/3 s**3 + 2/5 s**5 + .....,
 *           = 2s + s*R
 *      We use a special Reme algorithm on [0,0.1716] to generate
 *  a polynomial of degree 14 to approximate R The maximum error
 *  of this polynomial approximation is bounded by 2**-58.45. In
 *  other words,
 *              2      4      6      8      10      12      14
 *      R(z) ~ Lg1*s +Lg2*s +Lg3*s +Lg4*s +Lg5*s  +Lg6*s  +Lg7*s
 *      (the values of Lg1 to Lg7 are listed in the program)
 *  and
 *      |      2          14          |     -58.45
 *      | Lg1*s +...+Lg7*s    -  R(z) | <= 2
 *      |                             |
 *  Note that 2s = f - s*f = f - hfsq + s*hfsq, where hfsq = f*f/2.
 *  In order to guarantee error in log below 1ulp, we compute log
 *  by
 *      log(1+f) = f - s*(f - R)    (if f is not too large)
 *      log(1+f) = f - (hfsq - s*(hfsq+R)). (better accuracy)
 *
 *  3. Finally,  log(x) = k*ln2 + log(1+f).
 *              = k*ln2_hi+(f-(hfsq-(s*(hfsq+R)+k*ln2_lo)))
 *     Here ln2 is split into two floating point number:
 *          ln2_hi + ln2_lo,
 *     where n*ln2_hi is always exact for |n| < 2000.
 *
 * Special cases:
 *  log(x) is NaN with signal if x < 0 (including -INF) ;
 *  log(+INF) is +INF; log(0) is -INF with signal;
 *  log(NaN) is that NaN with no signal.
 *
 * Accuracy:
 *  according to an error analysis, the error is always less than
 *  1 ulp (unit in the last place).
 *
 * Constants:
 * The hexadecimal values are the intended ones for the following
 * constants. The decimal values may be used, provided that the
 * compiler will convert from decimal to binary accurately enough
 * to produce the hexadecimal values shown.
 */
 
static const double
Lg1 = 6.666666666666735130e-01,  /* 3FE55555 55555593 */
Lg2 = 3.999999999940941908e-01,  /* 3FD99999 9997FA04 */
Lg3 = 2.857142874366239149e-01,  /* 3FD24924 94229359 */
Lg4 = 2.222219843214978396e-01,  /* 3FCC71C5 1D8E78AF */
Lg5 = 1.818357216161805012e-01,  /* 3FC74664 96CB03DE */
Lg6 = 1.531383769920937332e-01,  /* 3FC39A09 D078C69F */
Lg7 = 1.479819860511658591e-01;  /* 3FC2F112 DF3E5244 */
 
/*
 * We always inline k_log1p(), since doing so produces a
 * substantial performance improvement (~40% on amd64).
 */
static inline double
k_log1p(double f)
{
    double hfsq,s,z,R,w,t1,t2;
 
    s = f/(2.0+f);
    z = s*s;
    w = z*z;
    t1= w*(Lg2+w*(Lg4+w*Lg6));
    t2= z*(Lg1+w*(Lg3+w*(Lg5+w*Lg7)));
    R = t2+t1;
    hfsq=0.5*f*f;
    return s*(hfsq+R);
}